How to choose aluminum ceiling？

How to choose aluminum ceiling:

There are many specifications for aluminum gussets, including the panel width, thickness, and height of the folded edge. The selection should be based on the characteristics of the bathroom at home. The aluminum gusset is divided into two types: punched and flat on the surface. The punched holes on the surface can ventilate and absorb sound, and the inside of the pinch plate is covered with a layer of film cushion, and the moisture can be absorbed by the film through the punching holes, so it is most suitable for kitchen and bathroom with more moisture. On the market, 600mm×600mm microporous square plates, C150, C100 strips and 300×300, 300×600 aluminum gussets are the most widely used.

The quality of the aluminum gusset is not all in the thickness, the key lies in the texture of the aluminum material. Generally, the aluminum gusset for engineering has 0.8 mm, or even

thicker, why? Because the gussets used in some projects are very long, in order to prevent deformation, they should be thicker and harder. On the contrary, the aluminum gussets used for home decoration are rarely more than 4 meters long, and there is no heavy weight on the aluminum buckle ceiling. Therefore, it can be said that 0.6 mm is enough for home improvement aluminum gussets. Then, why do you go to the building materials city, many salesmen tell you their 0.8mm, and some friends say that someone introduced him to 0.88mm; it is often because their boards are not good, so they can only use the thickness to confuse people— - It's really ruinous.

Tell everyone clearly that 0.6mm is enough. Take a well-known brand of aluminum gusset plate as an example, its price is more than 300 yuan per square meter, but what is its thickness? 0.5mm is not as good as 0.6mm! Why, the quality of the board is not the thickness, but the substrate. In fact, if the aluminum gusset you are consulting is a famous brand, most of them are 0.6 mm in the mid-range.

As for why some brands of 0.8mm are not good, and some miscellaneous brands use aluminum from pop-top cans, because of the quality of the aluminum itself, it is impossible for them to make the aluminum gusset very thin, because Aluminum is not good, and there is no way for the board to be thinned evenly, so they can only make it thicker.

Therefore, to identify the aluminum gusset, in addition to paying attention to the surface finish, it is also necessary to observe whether the thickness of the board is uniform, and pinch it by hand.

Feel it under the board to see if the elasticity and toughness are good.